New tackle room

[zodiac]

Rather proud of this self build!
Looking for inspiration, I have a blank canvass for the new tackle room
4m by 4m Square, 2.4 m high.
Just a chest freezer in at the moment, I'm starting shelves etc at the weekend. If you were starting from scratch, how would you store rods? I'd like room for around 12 fully set up and ready to go easily. Wall racks? Racks from the ceiling? Everything has been stored in a walk in cupboard till now so I've no set idea of how I'm going to store things now.

20231201_143332.jpg

20231201_143324.jpg

20231201_143313.jpg

[Andytheammer]

Jealous!

[Cyprio]

That looks excellent G.

Who did you get to do the floor
I’ve just added six ladder supports so my three rod bags are stored off the ground.
Here’s one bag I tested after taking off the ladder.
Bag hooks are obviously closer together and stable.

EC963FF2-FDA5-4100-8287-8B3289B50C7C.jpeg

Don’t forget room for a table and a fridge for the beers.
TV and speakers

[zodiac]

That looks excellent G.

Who did you get to do the floor
I’ve just added six ladder supports so my three rod bags are stored off the ground.
Here’s one bag I tested after taking off the ladder.
Bag hooks are obviously closer together and stable.
EC963FF2-FDA5-4100-8287-8B3289B50C7C.jpeg
Don’t forget room for a table and a fridge for the beers.
TV and speakers

The van wouldn't start this morning so it was a bad news call to a couple of customers but at least I got the floor down and skirting on in the tackle room!

[Happy Hayes]

Looks the b******s
Funnily enough that’s what I am after ,I’ve got the box room ,but it’s not big enough
( to much tackle according to the wife )
Maybe one day .
Regards
Tom

[zodiac]

So trying out ideas for rod storage. I'm happy with the base. It's just 70mm plastic down pipe cut in to sections. The frame holds it in place fairly snug but there's still a bit of movement side to side so the flexibility to accommodate big reels etc.
I'm not happy with the flimsy foam and plastic keepers for the wall. I'm going to look in to something else, whether I buy it or make it I'm not quite sure. Any suggestions?

20231209_171221.jpg

20231209_171242.jpg

[Cyprio]

How about slots like this. The elastic running across keeps the rod still once inserted into slots.

98CB362E-08AA-4016-9F82-737ECDB709BA.jpeg

Or curved like this black line showing elastic (the other side of rod obviously)

A3F76889-7EA7-4D5F-8A11-E62DBC3CAA0D.jpeg

[zodiac]

I think they're more designed for running horizontally along the wall. I need quite a bit of space between them as I have a lot of big bulky reels. I'll probably try to make something.

[Bob Watson]

I made a similar set up under the stairs. I can't quite make out if you've done it from the pics but I put an angled piece of 4" x 1" at the bottom of the rack to "force" the top of the rods against the wall.

[Steve Le maitre]

So trying out ideas for rod storage. I'm happy with the base. It's just 70mm plastic down pipe cut in to sections. The frame holds it in place fairly snug but there's still a bit of movement side to side so the flexibility to accommodate big reels etc.
I'm not happy with the flimsy foam and plastic keepers for the wall. I'm going to look in to something else, whether I buy it or make it I'm not quite sure. Any suggestions?


20231209_171221.jpg

20231209_171242.jpg

you could do away with those plastic pipe sections for the but end of the rods and use water pipe inserts which would be available in the size you want.
Run a length of timber off the ground at a height that suits, (probably 5") holes can be drilled and inserts spaced to accommodate your rods without any fouling of reel handles etc.

[Steve Le maitre]

.......sorry just read you're happy with the base. Anyway wouldn't be too much work to re do it -

[Steve Le maitre]

Just thinking if you ran two separate lengths of timber again parallel to the floor one above the other and had inserts in both that correspond top and bottom the rods would stand up in those without any other support needed.
You would need some extra ceiling clearance above the rods for this method to be able to lower them in.

[zodiac]

I've settled on drilling a row of 10mm holes in the timber on the wall then inserting 10mm dowel section, somewhere about 100mm in length. I'll try this today and see if there's anything else needed to retain them.

[zodiac]

Well my wife has just dropped the bombshell that she wants to clear a couple of the cupboards in the house and keep stuff in 'the new outhouse '
I said 'its not the f*****g outhouse, it's my fishing room. Besides, there's already too much to go in it, there's no room' She said we'll you'll have to sell some stuff.

So, I have for sale-
A shark upright hoover
An ironing board
2 mirrors which have previously been on the wall
Some boxes of old photos
A box full of miscellaneous half tins of paint
A big tesco bag-for-life full of other bags-for-life
Various women's shoes and boots- size 5

More to follow once I empty the other cupboard.

[davelumb]

[Stens]

Looks quality
Im just reducing my tackle after spending so many years building my collection I have even found rods I forgot I had got

[zodiac]

I've done as much as I can until I get the rod storage sorted and get them all out the way. I'm considering scrapping what I've started and going for wall mounted racks. I shall ponder for a couple of days till I get the chance to get more work done in here. Real work is getting in the way unfortunately.

20231210_163802.jpg

20231210_163731.jpg

[benelli]

I pinched Rob Shallcrofts idea off his article on the pikepool (Garage mindset), for rod storage, worth a look.

[zodiac]

I pinched Rob Shallcrofts idea off his article on the pikepool (Garage mindset), for rod storage, worth a look.

I'll have a look at that cheers

[benelli]

I pinched Rob Shallcrofts idea off his article on the pikepool (Garage mindset), for rod storage, worth a look.

I'll have a look at that cheers

Nothing exciting but you can space the rods as you want

IMG_20231210_114014320.jpg

[zodiac]

I pinched Rob Shallcrofts idea off his article on the pikepool (Garage mindset), for rod storage, worth a look.

I'll have a look at that cheers

Nothing exciting but you can space the rods as you want
IMG_20231210_114014320.jpg

Yes that would work. Not fancy but simple and functional.
There are 3 girls in the house, I could use some of the hair bands I find scattered over the house.

[brian harrison]

Have a look on my post on a rod rack i made for the garage, it works a treat.
Its near bottom of page of threads.

[zodiac]

I'm going to try these. If the simple solution works then no need to look any further!

Screenshot_20231212_094633_Amazon Shopping.jpg

[zodiac]

Well these wee plastic clips work a treat. Thicker rods are better with two, slimmer rods are fine with one.

17024098037107816792376168892741.jpg

17024098037107816792376168892741.jpg

[benelli]

Just the job!

[Carlperkins]

Personally
Get them on the ceiling
Out the way

[Crackoff]

Looks brill

But that door looks a bit skew-whiff to me

Grant

[david1992]

Just thinking if you ran two separate lengths of timber again parallel to the floor one above the other and had inserts in both that correspond top and bottom the rods would stand up in those without any other support needed.
You would need some extra ceiling clearance above the rods for this method to be able to lower them in.

[Cyprio]

Just thinking if you ran two separate lengths of timber again parallel to the floor one above the other and had inserts in both that correspond top and bottom the rods would stand up in those without any other support needed.
You would need some extra ceiling clearance above the rods for this method to be able to lower them in.

Steve is that you doing a Nev

206D22B4-A279-43DC-AC7E-1875878B6084.jpeg

C4CBBE91-EFF2-4FCC-AF70-07B92F51CEE6.jpeg

That’s what he said

[Steve Le maitre]

No, me having one account is probably enough for most folks Andy