Wooden lure bodies
- andypee
- Chub
- Posts: 1171
- Joined: Tue Feb 02 2016 08:34
Wooden lure bodies
Hi all,
Would like to ask if anyone knows where I could get some wooden lure bodies produced ? I've tried making some myself which are ok but not identical as such, so when wanting to make another lure that is the same it needs to be re-weighted slightly and in a slightly different position, every time. Which does not give good consistent lure movement, or at least as near as could be if better produced.
I've noticed my process to be slow, so what I would like is some identical blanks making so that once one is weighted correctly I can produce more of the same lures and know how much weight is needed and where the holes go everytime!
Just have no idea who can & would produce these for me
Any info would be much appreciated
Cheers guys
Andy.
Would like to ask if anyone knows where I could get some wooden lure bodies produced ? I've tried making some myself which are ok but not identical as such, so when wanting to make another lure that is the same it needs to be re-weighted slightly and in a slightly different position, every time. Which does not give good consistent lure movement, or at least as near as could be if better produced.
I've noticed my process to be slow, so what I would like is some identical blanks making so that once one is weighted correctly I can produce more of the same lures and know how much weight is needed and where the holes go everytime!
Just have no idea who can & would produce these for me
Any info would be much appreciated
Cheers guys
Andy.
- Steve Dennington
- Zander
- Posts: 5982
- Joined: Mon Aug 29 2011 05:00
- Location: Suffolk
Re: Wooden lure bodies
No matter how precise you are with replication, you'll always get variation in ballasting, even within a batch cut from the same piece of wood. If you're looking to churn lures out in large volume, with each one as close to identical to the last as possible, I'd look into resin moulding, but that too has its complications!
Routering wooden baits is much more consistent than hand shaping, so may be a good option for you, but if you want a more natural looking rounded profile hand shaping is the only way.
There aren't any shortcuts, which is why a lot of handmade baits are so expensive.
Routering wooden baits is much more consistent than hand shaping, so may be a good option for you, but if you want a more natural looking rounded profile hand shaping is the only way.
There aren't any shortcuts, which is why a lot of handmade baits are so expensive.
- MarkBerrisford
- Chub
- Posts: 1868
- Joined: Fri Sep 02 2011 05:00
- Location: Manchester
Re: Wooden lure bodies
As Steve said differ er wood densities mean you never get them needing exactly the same weight, which is where mass produced wooden lures fall down.
You need to make templates and as Steve said a bench mounted router saves a lot of time, if your getting uniformity in the shape you can weigh the blanks which will give you an idea of how much lead to add, keep notes of blank weights and how deep to drill your holes, if your only making them for yourself a bit of extra time is no big deal
You need to make templates and as Steve said a bench mounted router saves a lot of time, if your getting uniformity in the shape you can weigh the blanks which will give you an idea of how much lead to add, keep notes of blank weights and how deep to drill your holes, if your only making them for yourself a bit of extra time is no big deal
Search MB Custom Lures on Facebook
- andypee
- Chub
- Posts: 1171
- Joined: Tue Feb 02 2016 08:34
Re: Wooden lure bodies
Ahhh I see
The info you guys have supplied has given me a better idea of what's involved now, I suppose I just assumed that lure builders must have some quick and fast way of producing bodies, so they can make many lures act the exact same way!
Learning all the time
Andy.
The info you guys have supplied has given me a better idea of what's involved now, I suppose I just assumed that lure builders must have some quick and fast way of producing bodies, so they can make many lures act the exact same way!
Learning all the time
Andy.
- DaveGreenwood
- Zander
- Posts: 5608
- Joined: Sun Aug 28 2011 05:00
- Location: On Top
Re: Wooden lure bodies
andypee wrote: ↑Sun Sep 08 2019 14:21 -As said wooden baits have to be individually weighted and tuned, no shortcuts but it's worth it..Ahhh I see
The info you guys have supplied has given me a better idea of what's involved now, I suppose I just assumed that lure builders must have some quick and fast way of producing bodies, so they can make many lures act the exact same way!
Learning all the time
Andy.
- Mike J
- Ferox Trout
- Posts: 11094
- Joined: Wed Nov 09 2016 09:26
- Location: Wessex
Re: Wooden lure bodies
Andy,
The commercial manufacturers used to use a profile milling machine, probably the smaller producers still do.
There are better materials for lures than wood for the individual but the first question is how many do you plan to loose in a season?
If its only a couple its better to spend those dark winter night whittling by the fire.
(Using 100lb Ive only lost one in the past 5+ years)
The commercial manufacturers used to use a profile milling machine, probably the smaller producers still do.
There are better materials for lures than wood for the individual but the first question is how many do you plan to loose in a season?
If its only a couple its better to spend those dark winter night whittling by the fire.
(Using 100lb Ive only lost one in the past 5+ years)
'No Man Ever Fishes The Same River Twice, .... For It Is Not The Same River, .... And He Is Not The Same Man' Heraclitus of Ephesus
- andypee
- Chub
- Posts: 1171
- Joined: Tue Feb 02 2016 08:34
Re: Wooden lure bodies
Mike J wrote: ↑Mon Sep 09 2019 10:30 -Andy,
The commercial manufacturers used to use a profile milling machine, probably the smaller producers still do.
There are better materials for lures than wood for the individual but the first question is how many do you plan to loose in a season?
If its only a couple its better to spend those dark winter night whittling by the fire.
(Using 100lb Ive only lost one in the past 5+ years)
To be honest Mike the last lure I lost was many years back now, and that was on a cast after the link snapped & I watched a brand new first cast bulldawg fly off into the distance
Don't get me wrong I really enjoy the making of the lures but I have very limited tools, jigsaw, sander & sandpaper, I just thought there maybe some wood turners that may be set up to repeat designs over and over, I really like the design side and painting, no idea if it would ever go anywhere other than a hobby, but who knows, never say never, if others can and all that
I'm not even 100% sure of the correct style files etc to purchase to create curved lure bodies etc.
I will need a lot more help & research
Appreciate all your help
Andy.
- Chico 48 PAC
- Chub
- Posts: 1963
- Joined: Sat Aug 27 2011 05:00
- Location: Bardney on't mud
- Contact:
Re: Wooden lure bodies
What sort of weight lures are you wanting?
JOIN THE PAC- http://www.pacgb.co.uk/join.html
www.chicoslures.co.uk - if you use FC for pike then do not use me.
www.chicoslures.co.uk - if you use FC for pike then do not use me.
- andypee
- Chub
- Posts: 1171
- Joined: Tue Feb 02 2016 08:34
Re: Wooden lure bodies
Chico 48 PAC wrote: ↑Mon Sep 09 2019 18:02 -To be honest I normally chuck lures up to 140g about, I'm really not sure exactly what weight I'm after as I'm not that far down the road yet.What sort of weight lures are you wanting?
At present I've cut some bodies out flat sided jerk bait style of about 8", I've got a few more steps to take before they can have a dip and be weighted, only then will I have an idea of what my home mades will take!
My actually favourite weight of lure is 120g, I'm not sure that kind of sized jerk bait will be taking anything like that though, as I don't want it straight down sinking
As you can see I'm only just learning really like the idea and find it interesting on how to make a good lure action by getting the weight correct.
I will be soaking up as much advice as I possibly can long winter nights in front of the old log burner tuning my skills
I really do appreciate all advice, help & suggestions
Andy.
- Mike J
- Ferox Trout
- Posts: 11094
- Joined: Wed Nov 09 2016 09:26
- Location: Wessex
Re: Wooden lure bodies
If I was you Andy I wouldn't even consider using wood as a base material.
There are so many stronger materials that are easier to work than wood eg; the boards used in deck construction in boat building are so light an 18mm 3x3m sheet can be lifted with one hand yet take the weight of a man when support on just on its corners.
Have you checkedout the composite planking used to construct modern garden decking, more resilient than wood and certainly easier to work.
Because it comes in narrow planks it has to be glued together to produce something of realistic size which atleast stops all that drilling and poking around needed to install the through body wiring in a solid bodied lure.
I use building foam for float bodies, almost as soft as butter until its soaked in superglue, then you can stand on it without damage.
For shaping I would suggest you buy yourself a belt and disc sander like this https://www.machinemart.co.uk/p/scheppa ... nder-230v/
Think of it as an investment for your retirement
There are so many stronger materials that are easier to work than wood eg; the boards used in deck construction in boat building are so light an 18mm 3x3m sheet can be lifted with one hand yet take the weight of a man when support on just on its corners.
Have you checkedout the composite planking used to construct modern garden decking, more resilient than wood and certainly easier to work.
Because it comes in narrow planks it has to be glued together to produce something of realistic size which atleast stops all that drilling and poking around needed to install the through body wiring in a solid bodied lure.
I use building foam for float bodies, almost as soft as butter until its soaked in superglue, then you can stand on it without damage.
For shaping I would suggest you buy yourself a belt and disc sander like this https://www.machinemart.co.uk/p/scheppa ... nder-230v/
Think of it as an investment for your retirement
'No Man Ever Fishes The Same River Twice, .... For It Is Not The Same River, .... And He Is Not The Same Man' Heraclitus of Ephesus
- andypee
- Chub
- Posts: 1171
- Joined: Tue Feb 02 2016 08:34
Re: Wooden lure bodies
Mike J wrote: ↑Tue Sep 10 2019 13:50 -If I was you Andy I wouldn't even consider using wood as a base material.
There are so many stronger materials that are easier to work than wood eg; the boards used in deck construction in boat building are so light an 18mm 3x3m sheet can be lifted with one hand yet take the weight of a man when support on just on its corners.
Have you checkedout the composite planking used to construct modern garden decking, more resilient than wood and certainly easier to work.
Because it comes in narrow planks it has to be glued together to produce something of realistic size which atleast stops all that drilling and poking around needed to install the through body wiring in a solid bodied lure.
I use building foam for float bodies, almost as soft as butter until its soaked in superglue, then you can stand on it without damage.
For shaping I would suggest you buy yourself a belt and disc sander like this https://www.machinemart.co.uk/p/scheppa ... nder-230v/
Think of it as an investment for your retirement
Some good info there Mike much appreciated I had not considered what you suggested, I will deffo look into your suggestions
With regards to the wooden bodies, the videos I've been watching on lure making have not used wire through the wood, just screw in eyes with epoxy for holdings am I missing something here ? I would like to get this right if I can !!
The only time I've actually seen wire used was when a wooden lure was cut in half then re epoxied together ?
Little confused now if I can go with the screw in eyes or not.
All interesting stuff to learn
-
- Chub
- Posts: 1204
- Joined: Sat Mar 26 2016 09:40
Re: Wooden lure bodies
I’ve made 2 attempts at lure building in the past, just couldn’t get in to it, all the tweaking and subtle changes and I soon lost interest, router table and templates with bearing cutters to get a exact shape every time but watch your fingers, there is safer ways if you can be bothered to make some jigs that hold the workpiece and run on a external template, plenty of stuff on YouTube
You do not have the required permissions to view the files attached to this post.
- MarkBerrisford
- Chub
- Posts: 1868
- Joined: Fri Sep 02 2011 05:00
- Location: Manchester
Re: Wooden lure bodies
Screw eyes are plenty strong enough unless your going to use balsa in which case you’d have to through wire
Search MB Custom Lures on Facebook
- andypee
- Chub
- Posts: 1171
- Joined: Tue Feb 02 2016 08:34
Re: Wooden lure bodies
Danoutdoors wrote: ↑Tue Sep 10 2019 14:58 -Bottom lure looks good buddyI’ve made 2 attempts at lure building in the past, just couldn’t get in to it, all the tweaking and subtle changes and I soon lost interest, router table and templates with bearing cutters to get a exact shape every time but watch your fingers, there is safer ways if you can be bothered to make some jigs that hold the workpiece and run on a external template, plenty of stuff on YouTube
8BBE50CA-6DA5-42C1-9F5D-74DF9C6D57C2.jpeg
What did you find the hardest ? Getting the right glide action ?
The template jigs are an interesting idea will have a look into them
Andy.
- andypee
- Chub
- Posts: 1171
- Joined: Tue Feb 02 2016 08:34
Re: Wooden lure bodies
MarkBerrisford wrote: ↑Tue Sep 10 2019 16:50 -Thank God for that I thought I was in trouble there alreadyScrew eyes are plenty strong enough unless your going to use balsa in which case you’d have to through wire
That's my main concern a pike hitting the lure and the treble coming away from the lure, screw eye and all
Just be my luck that !
Andy.
-
- Chub
- Posts: 1027
- Joined: Mon Oct 03 2011 05:00
Re: Wooden lure bodies
andypee wrote: ↑Mon Sep 09 2019 19:59 -AndyChico 48 PAC wrote: ↑Mon Sep 09 2019 18:02 -To be honest I normally chuck lures up to 140g about, I'm really not sure exactly what weight I'm after as I'm not that far down the road yet.What sort of weight lures are you wanting?
At present I've cut some bodies out flat sided jerk bait style of about 8", I've got a few more steps to take before they can have a dip and be weighted, only then will I have an idea of what my home mades will take!
My actually favourite weight of lure is 120g, I'm not sure that kind of sized jerk bait will be taking anything like that though, as I don't want it straight down sinking
As you can see I'm only just learning really like the idea and find it interesting on how to make a good lure action by getting the weight correct.
I will be soaking up as much advice as I possibly can long winter nights in front of the old log burner tuning my skills
I really do appreciate all advice, help & suggestions
Andy.
I wouldn’t worry about trying to get your wooden lures identical. Each one being different is a positive. In the past I bought about two dozen Reef Hawgs.
None were the same, even after i’d “tuned” them, but all caught me pike. The same went for hand made wooden lures by well respected U.K. lure makers and ones I’d made myself.
As Mark said screw eyes are the way to go in all bar balsa. I was warned off gluing them by one lure maker though. He reckoned that this clogged up & lessened the effectiveness of the thread, weakening the grip rather than improving it. True or not I don’t know, but certainly none of the old school wooden musky lures had their screw eyes glued & they’ve accounted for some massive fish over the years.
Last edited by sebshelton on Tue Sep 10 2019 23:40, edited 2 times in total.
- Mike J
- Ferox Trout
- Posts: 11094
- Joined: Wed Nov 09 2016 09:26
- Location: Wessex
Re: Wooden lure bodies
MarkBerrisford wrote: ↑Tue Sep 10 2019 16:50 -Screw eyes are plenty strong enough unless your going to use balsa in which case you’d have to through wire
Sorry Mark, you may think a mass produced screw eye with its 5-6threads holding in 1/4" of wood is strong enough but from an engineering viewpoint I disagree.
A tiny screw thread in a wooden body csn never be the equal of a through wired system for anchoring hooks in lures intended for big pike.
'No Man Ever Fishes The Same River Twice, .... For It Is Not The Same River, .... And He Is Not The Same Man' Heraclitus of Ephesus
- MarkBerrisford
- Chub
- Posts: 1868
- Joined: Fri Sep 02 2011 05:00
- Location: Manchester
Re: Wooden lure bodies
I agree screw eyes are not as strong as through wiring but they are strong enough for pike fishing, I’ve made 100’s of lures and have never had an instance of a screw eye pulling out of the lure reported back to me
Search MB Custom Lures on Facebook
- andypee
- Chub
- Posts: 1171
- Joined: Tue Feb 02 2016 08:34
Re: Wooden lure bodies
sebshelton wrote: ↑Tue Sep 10 2019 23:19 -Yeah I deffo think I will have to calm my perfectionism side down I can totally see your point with every lure acting a little different been a good thing, thinking on that is probably better and will keep it more interesting when changing from lure to lure, finding how to work each one best!andypee wrote: ↑Mon Sep 09 2019 19:59 -AndyChico 48 PAC wrote: ↑Mon Sep 09 2019 18:02 -To be honest I normally chuck lures up to 140g about, I'm really not sure exactly what weight I'm after as I'm not that far down the road yet.What sort of weight lures are you wanting?
At present I've cut some bodies out flat sided jerk bait style of about 8", I've got a few more steps to take before they can have a dip and be weighted, only then will I have an idea of what my home mades will take!
My actually favourite weight of lure is 120g, I'm not sure that kind of sized jerk bait will be taking anything like that though, as I don't want it straight down sinking
As you can see I'm only just learning really like the idea and find it interesting on how to make a good lure action by getting the weight correct.
I will be soaking up as much advice as I possibly can long winter nights in front of the old log burner tuning my skills
I really do appreciate all advice, help & suggestions
Andy.
I wouldn’t worry about trying to get your wooden lures identical. Each one being different is a positive. In the past I bought about two dozen Reef Hawgs.
None were the same, even after i’d “tuned” them, but all caught me pike. The same went for hand made wooden lures by well respected U.K. lure makers and ones I’d made myself.
As Mark said screw eyes are the way to go in all bar balsa. I was warned off gluing them by one lure maker though. He reckoned that this clogged up & lessened the effectiveness of the thread, weakening the grip rather than improving it. True or not I don’t know, but certainly none of the old school wooden musky lures had their screw eyes glued & they’ve accounted for some massive fish over the years.
The not using epoxy on the eyes is an interesting thing for debate, i would be very interested to hear other lure makers views on this, funny I did watch one video last week and the guy never used epoxy on the screw eyes, at the time I thought it was a little odd, maybe not though
Andy.
- andypee
- Chub
- Posts: 1171
- Joined: Tue Feb 02 2016 08:34
Re: Wooden lure bodies
Mike J wrote: ↑Tue Sep 10 2019 23:33 -I would agree Mike stronger for sure, would you always use the wire way if you were to make lures out of any type of wood, or just balsa as Mark stated earlier ?MarkBerrisford wrote: ↑Tue Sep 10 2019 16:50 -Screw eyes are plenty strong enough unless your going to use balsa in which case you’d have to through wire
Sorry Mark, you may think a mass produced screw eye with its 5-6threads holding in 1/4" of wood is strong enough but from an engineering viewpoint I disagree.
A tiny screw thread in a wooden body csn never be the equal of a through wired system for anchoring hooks in lures intended for big pike.
Andy.
- andypee
- Chub
- Posts: 1171
- Joined: Tue Feb 02 2016 08:34
Re: Wooden lure bodies
MarkBerrisford wrote: ↑Wed Sep 11 2019 06:19 -Mark, do you use epoxy on the screw eyes then ? Interesting stuff all thisI agree screw eyes are not as strong as through wiring but they are strong enough for pike fishing, I’ve made 100’s of lures and have never had an instance of a screw eye pulling out of the lure reported back to me
Andy.
- Mike J
- Ferox Trout
- Posts: 11094
- Joined: Wed Nov 09 2016 09:26
- Location: Wessex
Re: Wooden lure bodies
Not balsa, actually I dont think I have ever used or owned a lure made of balsa.
Back in the late '60's the plastic 600sized Cisco Kids I was using were slowly degrading, hook 'hangers' aka screw eyes were coming loose and bodies were being punctured allowing water inside. My solution was Araldite epoxy, (there was only one product in those days).
I had been apprenticed to a company that produced aircraft fuel switches for the MOD, the tiny platinum contacts being held in position with thin 1/2mm strips of Araldite, these strips were produced by mixing the two parts then gently heating the mix before drawing it into thin fibres, allowing it to set then cutting to size, before reheating on final assembly.
Using this methodology I coated my best lures and secured the screw eyes in a manner impossible with the basic mix a smear system. Those lures are still catching today so I got something right.
I used Araldite on wooden lures with nail varnish remover as a thinner to obtain penetration, but it wasn't always successful.
These days there are some superb high tech strengtheners for wood, at the top end there are those applied by vacuum in the production of thin wood sheaths for high end fountain pens and jewellery, at the bottom a simple soak in epoxy resin.
But of all the materials available for todays lure anglers I think wood is down there with the flint axe.
Anyone who has examined the bodies of the Cralusso line of floats from Hungary or the hard body lures made by Westin of Denmark will quickly realise high density high strength foam is the future of lure bodies. We just need to learn how to use it.
Back in the late '60's the plastic 600sized Cisco Kids I was using were slowly degrading, hook 'hangers' aka screw eyes were coming loose and bodies were being punctured allowing water inside. My solution was Araldite epoxy, (there was only one product in those days).
I had been apprenticed to a company that produced aircraft fuel switches for the MOD, the tiny platinum contacts being held in position with thin 1/2mm strips of Araldite, these strips were produced by mixing the two parts then gently heating the mix before drawing it into thin fibres, allowing it to set then cutting to size, before reheating on final assembly.
Using this methodology I coated my best lures and secured the screw eyes in a manner impossible with the basic mix a smear system. Those lures are still catching today so I got something right.
I used Araldite on wooden lures with nail varnish remover as a thinner to obtain penetration, but it wasn't always successful.
These days there are some superb high tech strengtheners for wood, at the top end there are those applied by vacuum in the production of thin wood sheaths for high end fountain pens and jewellery, at the bottom a simple soak in epoxy resin.
But of all the materials available for todays lure anglers I think wood is down there with the flint axe.
Anyone who has examined the bodies of the Cralusso line of floats from Hungary or the hard body lures made by Westin of Denmark will quickly realise high density high strength foam is the future of lure bodies. We just need to learn how to use it.
Last edited by Mike J on Wed Sep 11 2019 14:31, edited 1 time in total.
'No Man Ever Fishes The Same River Twice, .... For It Is Not The Same River, .... And He Is Not The Same Man' Heraclitus of Ephesus
- MarkBerrisford
- Chub
- Posts: 1868
- Joined: Fri Sep 02 2011 05:00
- Location: Manchester
Re: Wooden lure bodies
andypee wrote: ↑Wed Sep 11 2019 06:56 -I use a dab of gorilla glue on the eyesMarkBerrisford wrote: ↑Wed Sep 11 2019 06:19 -Mark, do you use epoxy on the screw eyes then ? Interesting stuff all thisI agree screw eyes are not as strong as through wiring but they are strong enough for pike fishing, I’ve made 100’s of lures and have never had an instance of a screw eye pulling out of the lure reported back to me
Andy.
Search MB Custom Lures on Facebook
- andypee
- Chub
- Posts: 1171
- Joined: Tue Feb 02 2016 08:34
Re: Wooden lure bodies
Mike J wrote: ↑Wed Sep 11 2019 08:48 -Ahhh interesting that Mike, good readingNot balsa, actually I dont think I have ever used or owned a lure made of balsa.
Back in the late '60's the plastic 600sized Cisco Kids I was using were slowly degrading, hook 'hangers' aka screw eyes were coming loose and bodies were being punctured allowing water inside. My solution was Araldite epoxy, (there was only one product in those days).
I had been apprenticed to a company that produced aircraft fuel switches for the MOD, the tiny platinum contacts being held in position with thin 1/2mm strips of Araldite, these strips were produced by mixing the two parts then gently heating the mix before drawing it into thin fibres, allowing it to set then cutting to size, before reheating on final assembly.
Using this methodology I coated my best lures and secured the screw eyes in a manner impossible with the basic mix a smear system. Those lures are still catching today so I got something right.
I used Araldite on wooden lures with nail varnish remover as a thinner to obtain penetration, but it wasn't always successful.
These days there are some superb high tech strengtheners for wood, at the top end there are those applied by vacuumin the production of thin wood sheaths for high end fountain pens and jewellery, at the bottom a simple soak in epoxy resin.
But of all the materials available for todays lure anglers I think wood is down there with the flint axe.
Anyone who has examined the bodies of the Cralusso line of floats from Hungary or the hard body lures made by Westin of Denmark will quickly realise high density high strength foam is the future of lure bodies. We just need to learn how to use it.
I've got one of the cralusso floats after you suggested them to me a good while back, it still sits in its packaging as I've not had chance to use it as yet, I will have a look at it more closely over the weekend
Andy.
- andypee
- Chub
- Posts: 1171
- Joined: Tue Feb 02 2016 08:34
Re: Wooden lure bodies
MarkBerrisford wrote: ↑Wed Sep 11 2019 12:35 -andypee wrote: ↑Wed Sep 11 2019 06:56 -I use a dab of gorilla glue on the eyesMarkBerrisford wrote: ↑Wed Sep 11 2019 06:19 -Mark, do you use epoxy on the screw eyes then ? Interesting stuff all thisI agree screw eyes are not as strong as through wiring but they are strong enough for pike fishing, I’ve made 100’s of lures and have never had an instance of a screw eye pulling out of the lure reported back to me
Andy.
Cheers Mark much appreciated buddy
Andy.
- MarkBerrisford
- Chub
- Posts: 1868
- Joined: Fri Sep 02 2011 05:00
- Location: Manchester
Re: Wooden lure bodies
Other thing clean the screw eyes as oil left over from manufacture causes problems for glues, topcoats etc
Search MB Custom Lures on Facebook
- andypee
- Chub
- Posts: 1171
- Joined: Tue Feb 02 2016 08:34
Re: Wooden lure bodies
MarkBerrisford wrote: ↑Wed Sep 11 2019 13:53 -Nice one mark cheers buddy, I will give them a clean before use then.Other thing clean the screw eyes as oil left over from manufacture causes problems for glues, topcoats etc
Really looking forward to having a try!
Andy.